/ 
/
Automation and SCADA Engineer
- PLC Programming (Siemens - Step7, ABB);
- SCADA and HMI (WinCC v6.2, v7.x, S7cc , Visu+, TIA-Portal)
- Programming and put into operation of frequency converters(especially ABB - converters) for pump / fan and different motor application;
- Maintenance of electrical equipament and frequency converters (1 kW - 1 MW);
- Designing circuit diagrams for automations(eplan p8);
1.Radio communication between pumping station (2x30kW) and Scada Wincc V7.3.
Automation Solution:
- Reta-02 adapter for profinet communication between PLC and ABB ACS550 inverter.
- S7-1212C CPU (Tia Portal V13)
- Simatic SM1232 analog output
- IWLAN ACCESS POINT SCALANCE W788-1
- IWLAN CLIENT SCALANCE W748-1
- S7-315 CPU
- SCADA WINCC V7.3
2. Rehabilitation of Water Treatment Plant at Tarnaveni, Ludus, Iernut (Judetul Mures). Designing and developing automation process for pre-decantation, decantation and reagents dosage - electrical diagram using EPLAN P8.
Automation solution design using:
- Siemens S7300 PLCs
- ABB PLCs
- Redundant WinCC Scada V7.3
- HMI solution design with VISU+ (Phoenix Contact HMI TP xxxx)
- CAS (Central Archive System)
- Profibus communication with ABB drive, Phoenix contact I/O module, Siemens ET200 etc.
- WinCC MODBUS-TCP comunication with ABB PLCs
- Wincc SCADA OPC communication with EDW-GPRS.
3. Puting into service of a 250kW inverter used to drive the salt extraction elevator from Salina Praid
Politehnica University of Timisoara - License Degree and Master degree
- ANRE 2A/2B
